volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 7844 > < Fluid - A/T|Capacity Specifications|Page 7841
Page 1
background image

Fluid - A/T: Procedures

Oil level, checking

Warning! Avoid skin contact with the transmission fluid.

Note! If the transmission is over filled with oil, there may be operational problems. The oil must be filled to the correct level.

Note! Oil grade: Only ATF fluid Dexron III (with G-license). Transmission oil, Volvo P/N 116 1521-8 (1 liter container), 116 1621-6 (4 liter
container).

Checking the oil level

Note! Carry out the following check at an oil temperature of 85° ± 5°C. Select the digital display parameter. Select the parameter for the
transmission oil temperature.

Preparations:

-

park the car on a level surface

-

apply the parking brake

-

let the engine idle

-

move the gear selector lever to position P

-

select each gear position, stopping for five seconds in each position

-

move the gear selector lever to position P.

Note! Wait two minutes before checking the level.

Note! Cars with Geartronic gear selector assemblies: P-R-N-D-Man. Do not shift up in the manual positions. Cars with conventional gear
selector assemblies: P-R-N-D-3-2-1. Stop for five seconds in each position.

Oil level / temperature

Maximum level hot 85°C± 5°C.
Minimum level hot 85°C± 5°C.

Caution! The oil level must not exceed Hot Max.

Procedures|Page 7844 > < Fluid - A/T|Capacity Specifications|Page 7841