volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Input Speed Sensor/Output Speed Sensor, Replacing|Page 7953 > < Input Speed Sensor/Output Speed Sensor, Replacing|Page 7951
Page 8
background image

Checking diagnostic trouble codes (DTCs)

Check and erase any diagnostic trouble codes (DTCs).

4T65 Transmission

Transmission input speed sensor, replacing

Removing the line pressure solenoid

Note! The line pressure solenoid must be removed to access the input speed sensor.

See Solenoid, line pressure, replacing See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Solenoid, Line Pressure,
Replacing 

Removing the input speed sensor

Note! Note the position of the input speed sensor during removal. This is important for installation.

Remove:

-

the connector

-

the clip. Use a narrow screwdriver to remove the clip

-

the speed sensor.

Installing the input speed sensor

Input Speed Sensor/Output Speed Sensor, Replacing|Page 7953 > < Input Speed Sensor/Output Speed Sensor, Replacing|Page 7951