S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install:
-
the gear selector assembly stop and press it into place in the gear selector assembly
-
the yellow lock pin.
Check that the gear selector assembly stop is securely in place.
Connect the connectors.
Connect the rear connector to the gear selector assembly. Angle the front connector into the gear selector assembly.
Secure the wiring to the gear selector assembly.
Installing the top panel
Install:
-
the locking sleeve for the boot above the gear selector
-
the top panel.
Installing the gear selector knob and lock bracket
Install the gear selector knob. See Gear selector knob, Geartronic, replacing, 4T65EV-GT See: Gear Selector Knob, Geartronic, Replacing. Install the
lock bracket. See Gear selector knob, Geartronic, replacing, 4T65EV-GT See: Gear Selector Knob, Geartronic, Replacing.
Installing the center console
Install the center console. See Replacing the parking brake lever See: Brakes and Traction Control/Parking Brake System/Parking Brake Lever/Service
and Repair/Replacing the Parking Brake Lever.
Top Panel, Replacing
Top panel, replacing
Removal
Removing the gear selector knob
Remove the gear selector knob. See Gear selector knob, replacing, 4T65EV-GT, L.H.D See: Gear Selector Knob, Replacing
Removing the center console
Remove the center console. See Replacing the parking brake lever See: Brakes and Traction Control/Parking Brake System/Parking Brake Lever/Service
and Repair/Replacing the Parking Brake Lever.
Removing the top panel and connectors from the gear selector assembly
