S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Note! The locking sleeve cut-out must be forwards so that it passes into the guide for the gear selector knob
Slide the locking sleeve and boot up to the knob guide. Pull up the sleeve so that it locks the boot.
Initial setting of the key lock cable (adjustment)
Adjust the key lock cable. See: Key interlock cable, initial setting and adjustment .
Install the centre console
See Replacing the parking brake lever See: Brakes and Traction Control/Parking Brake System/Parking Brake Lever/Service and Repair/Replacing the
Parking Brake Lever.
AW55-50 / AWD50 Transmission
Gear selector lever assembly, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Removal
Removing the center console
V70R (B5254T4 engine)