S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Tighten to 25 Nm.
Install:
-
the mechanical cable to the gear selector. Secure the cable with the catch
-
cable on the gear selector nose
-
the key lock cable to the gear selector assembly.
Place the cable in the extracted locking sleeve the cable will be adjusted).
Initial setting of the key lock cable (adjusting)
See Gear selector lever assembly Geartronic, replacing See: Gear Selector Lever Assembly Geartronic, Replacing.
Installing the top panel on the gear selector assembly
Install the top panel and boot. See Printed circuit board gear selector assembly/top panel, replacing See: Printed Circuit Board Gear Selector
Assembly/Top Panel, Replacing.
Installing gear selector knob
Install the gear selector knob. See Gear selector knob, replacing See: Gear Selector Knob, Replacing.
Installing the center console
V70R (B5254T4 engine)
Install the center console. See.
V70 (other engines)
Install the center console. See(-2004) or(2005-).
V70XC/XC70
Install the center console. See(-2004) or(2005-).
