S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Carefully press the control module down into the grooves on the inside of the control module box. Press down all the way.
Insert tool 999 5722 Wrench See: Tools and Equipment/999 5722 Wrench around the control module.
Move the upper section of the tool forwards to stop and pull it up.
Press the cover into place over the control modules.
Check that the air ducts are correctly positioned.
Connect the battery negative lead. First read Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Ordering software
Order software according to the table below.
Finishing
Check that no diagnostic trouble codes have been stored during the repair.
