S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Tighten the screws. Tighten to 25 Nm.
Plug in the connector from the car.
Ensure that the rubber seal is in position in the upper section of the connector.
Install the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake
Pipe Master Cylinder / ABS Unit, Replacing
Top up the transmission fluid
Note! After replacing the transmission oil, the "Transmission oil change" counter must be reset. See Resetting Transmission fluid change
counter, AW55-50/51SN, AW50/51 AWD, 4T65EV-GT See: Transmission Control Systems/Testing and Inspection/Programming and
Relearning/Resetting the Transmission Fluid Change Counter
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).
