S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor, Replacing
AW50-42 Transmission
Transmission output speed sensor, replacing
Preparations
Switch off the ignition.
Remove the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake
Pipe Master Cylinder / ABS Unit, Replacing
Separate the vehicle speed sensor (VSS) connector. Remove the sensor
Remove the nut for the cable duct / bracket. Unhook the components.
Clean thoroughly around transmission output speed sensor. Remove the sensor.
Lubricate the O ring for the new vehicle speed sensor (VSS). Install the sensor
Install the sensor. Tighten to 5.5 Nm.
Install:
-
the bracket and cable duct. Tighten to 5.5 Nm
-
the connector.
Install the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake
Pipe Master Cylinder / ABS Unit, Replacing
Checking diagnostic trouble codes (DTCs)