S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Remove the windshield washer reservoir. See instruction Windshield washer reservoir assembly
-
Angle the windshield washer reservoir so that the windshield washer fluid does not leak. Alternatively empty the reservoir
-
Remove the hose from the motor
-
Disconnect the connector from the motor
-
Pull off the motor.
Rubber seal
-
Remove the windshield washer reservoir. See instruction Windshield washer reservoir assembly
-
Remove the washer motor. See instruction Washer motor
-
Pull off the seal.
Level sensor
-
Remove the windshield washer reservoir. See instruction Windshield washer reservoir assembly
-
Disconnect the connector from the washer motor
-
Remove the level sensor
-
Thread the level sensor and switch through the hole on the reservoir.
Filter and hose
-
Remove the windshield washer reservoir. See instruction Windshield washer reservoir assembly
-
Remove the hose from the motor
-
Remove the hose from the mountings on the side and under the reservoir
-
Remove the hose and filter.
Installation
Filter and hose