S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Driver/Vehicle Information Display: Description and Operation
Diagnostic Functions
Diagnostic functions in the combined instrument panel
Description of the scrolling values (lamps)
Warning lamp seat belts, value
Indicates whether the lamp is on or off according to the control module.
SRS warning lamp, value
Indicates whether the lamp is on or off according to the control module.
Brake system warning lamp, value
The ABS control module switches the lamp on or off via the Control area network (CAN). The lamp may assume the value on or off.
Parking brake warning lamp, value
Indicates whether the lamp is on or off according to the control module.
Low oil pressure warning lamp, value
The oil pressure signal can be read off. The signal comes from the engine control module (ECM). One can read off whether the low oil pressure lamp
should be on or off.
Charge lamp, value
Indicates whether the lamp is on or off according to the control module.
Indicator lamp rear fog lamp, value
Indicates whether the lamp is on or off according to the control module.
Malfunction indicator lamp (MIL), value
Indicates whether the lamp is on or off according to the control module.
ABS warning lamp, value
Indicates whether the lamp is on or off according to the control module.
Anti-spin warning lamp, value
The ABS control module transmits the lamp signal to the combined instrument panel via the Control area network (CAN). Indicates whether the lamp is
on or off according to the control module (DIM).
Service reminder indicator (SRI), value
The lamp flashes if the programmable service parameters are not programmed for some reasons or if the signals are not updated on the Control area
network (CAN). The lamp can be on, off or flashing.
Trailer warning lamp, value
Indicates whether the lamp is on or off according to the control module.
General orange warning lamp, value
Indicates whether the lamp is on or off according to the control module.
General red warning lamp, value
Indicates whether the lamp is on or off according to the control module.
High beam, value
Indicates whether the lamp is on or off according to the control module.
Low fuel level warning lamp, value
Indicates whether the lamp is on or off according to the control module.
Description of the scrolling values (other signals)
Fuel level, value
Signal from the two fuel level sensors in the rear electronic module. The value displays between 0 - 80 liters depending on the amount of fuel in the tank.
Engine coolant temperature, value
An engine coolant temperature (ECT) display. The signal comes from the engine control module (ECM) and the temperature is displayed in Celsius.
