S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
Remove the insulation panel from underneath the parcel shelf panel.
-
Saw out the two embossed circles. Even off the edges.
-
Scrape off any remains of the insulation panel to access the pre-embossed holes for the loudspeaker grille.
-
Drill out the eight embossed holes for the loudspeaker grille using a - 7 mm (9/32") drill.
-
Clean around the hole edges.
-
Repeat the operation on the other side.
-
Press the loudspeaker grille into the eight holes.
-
Install the locking washer on the eight lugs for the loudspeaker grille. Counterhold the other side of the panel. Press the locking washers into place.
Do not damage the loudspeaker grille when securing into place.
-
Repeat the operation on the other side.
Installation and final tasks (applies only to the S60)
