S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
Check that the indicator pin (2) is in the inner position and that the handle (1) is horizontal
-
Turn the lock cylinder (3) to the position illustrated. The plastic cover (4) protects the lock cylinder.
-
Remove the tow hitch. Place the tow hitch in the protective bag
-
Place the tow hitch in the spare wheel as illustrated
-
Lower the tow hitch so that the handle aligns with one of the holes in the rim
-
Insert the strap into the two closest holes in the rim. Route the strap around the tow hitch, between the handle and the tow hitch itself
-
Insert the strap into the tensioner. Tighten the tensioner until the tow hitch is secured.
-
Install the inner section (1) on the connection stud (2). Align the protective cover (3) with the inner section (1) towards the bumper. The hole (4) is
for the safety cable.
