S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Front Door Latch: Service and Repair
Lock Mechanism Front Side Door, Replacing
NOTE: The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removing the lock mechanism from the front side door
The side window must be closed.
Remove the door panel. See Panel, front side door, replacing.
Only move the run-off profile to one side. See Run-off profile and bracket.
CAUTION: For vehicles with deadlocking, the cover must be removed. See Handle, outer, front side door, replacing.
Remove the guide molding from the guide rail.
Drill out the blind rivet for the guide rail.
See Removing rivet.
Remove the guide rail by pulling it straight downwards.
Remove: