S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
the four sub-frame mountings
-
the sub-frame brackets screws
-
the brake hose mounting stays from mountings on the brackets
-
the brake pipes from the plastic clips on the brackets.
Note! Remove the fuel filter bracket on the right bracket.
Carefully lower the sub-frame.
Remove components from the sub-frame
Note! The lateral link, tie rod, lower control arm and wheel spindle are removed from the sub-frame as one unit.
Remove
-
the lateral links from the sub-frame
-
the tie rods
-
the wheel spindle from the upper control arm
-
the anti-roll bar control arms from the upper control arm
-
the anti-roll bar from the sub-frame.
Installing the sub-frame
Install components on the sub-frame
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair.