S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Install
-
the brake line mounting stays on the sub-frame bracket. Tighten to 25 Nm
-
the brake pipe in the clips on the sub-frame brackets
-
the screws for the sub-frame, at the front edge through the brackets
-
the screws for the brackets
Note! Use new screws for the sub-frame mountings. Tighten all the mountings. Tighten to 80 Nm.
-
the fuel filter with the holder on the right bracket. Tighten to 25 Nm.
Remove the lifting table.
Finishing
