S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
Clean the door sills where the new door sill trim strips are to be installed
-
Heat the door sill trim strip using a hot-air gun to approximately 60°C. At the same time detach the door sill trim strip. Use a plastic weatherstrip
tool. Do not damage the painted surfaces.
-
Heat and remove the remaining pieces of tape.
-
Clean the surfaces where the new door trim strip is to be installed. Use a mixture of 30 % windscreen washer fluid and 70% water. Wipe dry.
