S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Release the fastener.
Press out the vent.
Installation
Install:
In reverse order.
Tighten the seat belt. Tighten to 48 Nm.
Note! When installing the B-post panel: Check that the wiring for the seat belt, tensioner and sensor is tensioned and secured in the correct
position. Otherwise the wiring may be damaged when the panel is installed.
Panel, C-Post, Replacing
Panel, C-post, replacing
Replacing the C panel
Carry out operation Side cushion See: Seats/Seat Cushion/Service and Repair/Rear Seat/Side Cushion.
Remove the sealing trim strip.
Remove the 2 steel clips.