volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Organizer Bag|Page 16808 > < Organizer Bag|Page 16806
Page 13
background image

Remove the protective plastic from the adhesive bead. Check that the pin on the surround goes through the hole in the plastic panel and that the surround
follows the edge internally.
Then install the clips (P/N 191 695, one clip per pin). Press the clips in using a box wrench.
Check that the surround is secured on the upper side of the door panel.

Finishing

Installing the panel rear side door

Install the door panel. See: Panel, rear side door, replacing See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair.

Trim Strip, Wood Patterns

 Trim strip, wood patterns

Organizer Bag|Page 16808 > < Organizer Bag|Page 16806