S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
In reverse order.
Outer Head Restraint
Outer head restraint
Replacing outer head restraint
Remove:
-
the side pieces: Pull straight up.
-
upholstery: Pull the upholstery/trim straight up.
-
two head restraint screws.
Thread the head restraint through the hole in the foam/upholstery.
Disconnect the connector.
Replace head restraint.
Install:
In reverse order.
Press in the connector as late as possible.
Ensure that the cable does not come between the head restraint cassette and backrest frame.
Note! Ensure that the upholstery/foam is correctly adjusted and there are no ridges etc.
Central Head Restraint Foam
Central head restraint foam
Replacing central head restraint foam
Remove:
-
head restraint and upholstery according to Upholstery middle head restraint rear See: Rear Seat/Upholstery Middle Head Restraint Rear.
-
foam filling.
