S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Seat Cover: Service and Repair
Front Seat
Upholstery Back Rest, Replacing
Upholstery back rest, replacing
Preparatory work
Removing components
Remove:
-
the seat from the car. See Lifting the front seats in and out See: Service and Repair/Removal and Replacement/Front Seat/Lifting the Front Seats In
and Out
-
the lumbar support knob according to Lumber support adjustment knob, replacing See: Service and Repair/Removal and Replacement/Front
Seat/Lumbar Support Adjustment Knob, Replacing
-
the side piece: Pull straight out
-
the backrest adjustment knob. See Backrest adjustment knob See: Seat Back/Service and Repair/Front Seat/Backrest Adjustment Knob.
Removal
Removing upholstery
Fold the backrest or position the backrest in the forward folded position.
Slacken off the tension in lumbar support.
Remove the five half moon clips at the bottom edge of the backrest.
Remove the upholstery to the first lateral channel, two half moon clips for each front-rear channel.
Remove the upholstery completely.
Remove a half moon clip from each side in the front-rear channel.
Remove three half moon clips in the first lateral channel and two half moon clips in the upper channel.
