S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Brake Fluid Level Sensor/Switch: Service and Repair
Level sensor, brake fluid, replacing
Removal
Brake fluid level sensor
The brake fluid level sensor cannot be replaced separately. The entire reservoir must be replaced.
-
Disconnect the connector
-
Remove the brake fluid reservoir assembly. See: Left hand drive Brake fluid reservoir, replacing, L.H.D See: Brake Fluid Reservoir/Service and
Repair/Brake Fluid Reservoir, Replacing, L.H.D
Right hand drive
Installation
Brake fluid level sensor
In reverse order.
