S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Brake Fluid Pressure Sensor/Switch: Service and Repair
Pressure sensor, master cylinder, replacing
Preparations for replacing the pressure sensor on the master cylinder
(5-cylinder naturally aspirated engine)Remove the air cleaner (ACL) and preheating hose, see:
Left-hand drive, Master cylinder, replacing, L.H.D See: Brake Master Cylinder/Service and Repair/Master Cylinder, Replacing
Right-hand drive,
Cars with turbocharger (TC):
Remove the air hose between the air cleaner (ACL) and the turbocharger (TC).
Remove the relay box.
Removal
Preparations for checking the pressure sensor
Turn on the ignition.
Press the dynamic stability and traction control (DSTC) button on the dashboard (the green lamp lights in the button) so that the DSTC system is
engaged.
Checking pressure sensor