S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Tighten to 17 Nm.
Install:
-
the brake pipe in its holder. Open the holder
-
the integrated relay / fusebox. See Hydraulic unit, replacing See: Hydraulic Control Assembly - Antilock Brakes/Service and Repair
-
the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing See: Brake Pipe Master Cylinder / ABS Unit, Replacing.
Replacing the front-rear brake pipe to the rear junctions
Clean around the brake pipe on the ABS hydraulic modulator. Remove the brake pipe from the ABS hydraulic modulator and holder
