S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Electronic Brake Control Module: Service and Repair
Control Module (ABS), Replacing
Control module (ABS), replacing
Preparation
Disconnect the battery lead
Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Preparations for replacement
Note! There is no need to download software when replacing the ABS control module.
Remove the air cleaner (ACL) housing.
Remove the integrated relay / fusebox. Remove the connector for the ABS unit .
Removal
Remove the control module
Remove:
-
the pump motor connector
-
the four screws. Use a 6 mm torx external socket.
Carefully lift the control module.
Check the control module