S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Remove the starter motor mounting screws. Pull out the starter motor and put it aside. Remove the plug of the gauge hole. Rotate the crankshaft slightly
clockwise.
Install: 999 5451. Make sure that it bottoms against the engine block.
Aligning The Crankshaft
Turn the crankshaft courterclockwise to its stop against the crankshaft adjustment tool. Check that the marking on the crankshaft timing gear pulley
aligns with the marking on the oil pump.
Installing The Variable Valve Timing Unit on The Camshaft
NOTE!
Some engines have double VVT units/belt pulleys. If this is the case, the method is to be performed on both.
NOTE!
Oil the center screw before installation