S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Tighten the center screw on the belt tensioner. Tighten to
5 Nm.
Turn the variable valve timing unit clockwise until stop.
Hold it secure in the limit position.
Install the belt in the following order:
-
crankshaft
-
the idler pulley
-
intake cam
-
exhaust cam
-
water pump
-
belt tensioner.
Note! Adjust the timing gear pulleys so that the screws are not at a limit position in the oval holes. Also check that the markings correspond.
Tensioning the timing belt