S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Remove from turbo 2
-
the screws of the oil return line.
Turn the pipe to the side.
-
the pipe screw of the oil pressure pipe.
-
the nuts and washers at the manifold mounting to the cylinder head, cylinders 4, 5 and 6.
Lift off and carefully turn the turbocharger/manifold so the oil pressure pipe is released.
Note! Exercise extreme care so that the oil pressure pipe is not deformed.
Lift up and remove the turbocharger/manifold.
Releasing the coolant pump inlet pipe