S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Remove the nuts from the cover on the wing liner.
Position the upper timing cover.
Turn the crankshaft clockwise until the markings on the crankshaft and camshafts align.
Remove the upper timing cover.
Removing components
Remove
-
the connector for the variable valve timing solenoid.
-
the connector for the coolant temperature sensor.
-
the screws for the ignition coils and the two ground terminals.
Lift up and place the ignition coils and wiring to one side.
Note! Mark up the ignition coils before removal.
Removing the timing belt
