S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Seal the hose between the expansion tank and the radiator. Disconnect the hose at the tank.
Lift up the expansion tank and place it on top of engine.
Raise the car.
Remove
-
the right front wheel
-
the plastic nuts on the cover in the fender liner.
Install the upper timing belt cover.
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulleys correspond.
Turn the crankshaft a further 1/4 turn clockwise.
Then turn back counter-clockwise until the markings correspond.
Remove the upper timing belt cover.
Remove the 4 vibration damper screws. Counterhold the crankshaft central nut.
Remove
-
the vibration damper
-
the auxiliaries belt
