S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Install
-
the screw for the engine stabilizer brace mounting on the engine. Tighten to 80 Nm
-
the screws for the engine stabilizer brace mountings in the suspension turrets. Tighten to 50 Nm
-
the automatic transmission dip stick pipe
-
the heat deflector plate with new screws. Tighten to 25 Nm
-
the intake and charge air pipe hooks. Align against the plastic pipes and tighten.
Press the plastic pipes into place. Tighten the hose clamps
-
the mounting screws for the plastic pipes
-
the expansion tank cap.
Final check
Check
-
the coolant level
-
the oil level.
Test drive the engine. Check for leakage.
Top up the coolant if necessary.