S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
the clamps that hold the wiring to the rear of the cylinder head
-
the cover over the ignition coils
-
the upper timing cover
-
plastic charge air / intake pipe over the engine. Tighten the clamps
-
the engine stabilizer brace. Tighten the screws on the suspension turret. Tighten to 50 Nm. Tighten the screws on the engine stabilizer brace.
Tighten to 80 Nm
-
the covers over the suspension turrets
-
plastic nuts on the cover in the fender liner
-
the right front wheel Installing wheels See: Wheels and Tires/Wheels/Service and Repair.