S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Note! Check that the control module's connectors are intact.
Installing the driver door module (DDM)
Install the upper panel.
Position the control module in the hole on the door panel.
Check that the lower mounting for the control module is correctly located in the support on the door panel.
Press the control module into place.
Install:
-
the connectors
-
the nut and screw
-
the door panel, see Replacing the front door side panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Replacing the Front Door Side Panel.
Ordering software
Order software for the driver door module (DDM) according to the table below.
Finishing
Initialize the window position in the communication input.
Driver's Door Module/Passenger Door Module (DDM/PDM), Replacing
Driver's door module / passenger door module (DDM/PDM), replacing
S60 2001-, V70 2001-, V70XC 2001-, XC90
-
Replacing the driver's side door module. See Driver door module (DDM), replacing See: Driver Door Module (DDM)
-
Replacing the passenger side door module. See Passenger door module (PDM), replacing See: Passenger Door Module (PDM).
S80, V70 2000:
-
Replacing the driver and passenger side door modules. See Door module (power windows, power mirrors, child locks, central locking), front doors
See: Door Module (Power Windows, Power Mirrors, Child Locks, Central Locking), Front Doors.
Integrated Relay/Fusebox Cargo Compartment/Rear Electronic Module (REM), Replacing
Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing
Integrated relay/fusebox in the cargo compartment
Exposing the integrated relay/fusebox in the cargo compartment
