S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Install the large connector on the control module.
Lock the connector using the lock handle above the catch (A).
Install the other connector.
Installing the control module
Move the wiring to the outside of the control module.
Place the control module in the bracket and press it down.
Install the lock plate. Tighten the screw. Tighten to 10 Nm.
Reinstall the side panel.
After consultation with the customer, new software that corresponds to the car can be downloaded. Software for the accessory electronic module must be
downloaded first. Software for the connected accessories must then be downloaded.
Check that no diagnostic trouble codes (DTCs) have been stored during the repair.
Accessory Electronic Module with Wiring Kit
Accessory electronic module with wiring kit