S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Throttle Body: Procedures
Crankcase ventilation and electronic throttle module (ETM), cleaning
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removing
Remove:
-
the battery negative cable. Refer to: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting
-
the inlet hose between the air cleaner housing and the front panel
-
the charge air hose from the charge air pipe
-
the dipstick tube
The banjo nipple is located on the underneath of the intake manifold behind the mounting for the dip stick pipe.
Remove the 2 x connectors from the charge air hose between the charge air cooler (CAC) and the throttle body (TB).
Remove:
-
the hose clamp
-
the by-pass valve from the charge air hose.