S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).
4T65 Transmission
Transmission input speed sensor, replacing
Removing the line pressure solenoid
Note! The line pressure solenoid must be removed to access the input speed sensor.
See Solenoid, line pressure, replacing See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Components/Solenoid, Line Pressure, Replacing
Removing the input speed sensor
Note! Note the position of the input speed sensor during removal. This is important for installation.
Remove:
-
the connector
-
the clip. Use a narrow screwdriver to remove the clip
-
the speed sensor.
Installing the input speed sensor