S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Note! The S80 has the opposite seat belt geometry to the V70 (00-), i.e. the seat belt's double buckle is located on the opposite side.
Carry out on both sides
-
Remove the screw (1). For the single buckle - remove the middle seat belt's end mounting (2).
-
Replace the screw (1) with a new screw from the kit.
-
Expose the existing stud (5) by removing the perforated part of the insulation under the ISOFIX bracket (3).
-
Position the ISOFIX bracket (3) as illustrated.
-
Install the screw (1). For the single buckle - together with the middle seat belt's end mounting (2).
-
Install nut (4) and washer (6), from the kit.
-
Tighten the screw (1) to 40 Nm (30 lbf.ft.) and then tighten nut (4) to 30 Nm (22 lbf.ft.).
Applies to the V70 (00-)
-
Fold the rear seat cushion back into place.
Applies to the S60 and S80
-
Reinstall the rear seat cushion.