volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

ABOUT US
Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 1531 > < Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 1529

S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)

Page 4
background image

Install the front seat fixture to the body.
Install the 4 screws. Tighten to 25 Nm.
Install the protective cover over the screws.

Checking and test driving

Checking the dynamic stability and traction control (DSTC)

Press the dynamic stability and traction control (DSTC) switch (DSTC engaged).
Turn on the ignition. Wait for five seconds. The symbol on the dashboard should go out.

Test-driving

 Test Drive Form (DSTC (dynamic stability and traction control) /brake control module), description See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Drive Form (DSTC (Dynamic Stability And Traction
Control) /Brake Control Module), Description.

Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 1531 > < Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 1529