S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Trunk Lamp Switch: Service and Repair
Replacing the switch for the lock unit / cargo compartment lighting
Removal
Lock unit
The switch for the cargo compartment lighting is positioned in the lock unit.
-
Remove the upholstery on the tailgate. This is to gain access to the entire lock unit mechanism
-
Unhook the lever from the lock cylinder mechanism
-
Remove the screws (3 x) from the lock unit. Remove the lock unit
-
Disconnect the connector.
Installation
Lock unit
Install:
1. the connector,
2. the three screws for the lock unit. Tighten the screws to 10 Nm,
3. the lever for the lock mechanism,
4. the upholstery.