volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Starter Motor|Design|Page 10579 > < Starter Motor|Design|Page 10577
Page 1
background image

Starter Motor: Service and Repair

Replacing the starter motor

Removal

Starter motor

-

Disconnect the battery negative lead according to Battery, replacing See: Battery/Service and Repair/Removal and Replacement/Battery,
Replacing.

Caution! When removing and installing the battery leads, see Battery, disconnecting See: Battery/Service and Repair/Procedures/Battery,
Disconnecting.

-

Remove the air cleaner (ACL) housing

-

Remove the solenoid / solenoid valve from the air cleaner (ACL) housing

-

Remove the air cleaner (ACL) housing.

To remove the air cleaner (ACL) housing, see Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic
System/Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.

-

Remove the front screw from the bracket for the starter motor.

The starter motor bracket is withdrawn during the 2002 model year

-

Disconnect the connector and the cable from the solenoid

-

Remove the 2 screws securing the starter motor to the transmission

-

Remove the starter motor.

Removing the solenoid

Starter Motor|Design|Page 10579 > < Starter Motor|Design|Page 10577