S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Install lock grip pliers on the hose from the fluid reservoir as close to the power steering pump as possible.
Extract the oil with the suction unit according to Workshop Guide Bulletin 239.
Note! Place paper over the generator (GEN) as protection against oil.
Slacken off the hose clamp. Remove the hose from the power steering pump.
Warning! Avoid skin contact with the oil.
Removing the pressure hose
Slacken off screw (1) a few turns.
Remove:
-
the lock bracket (2)
-
the pipe nipple at the pump.
Removing the power steering pump