S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Remove the four nuts and the screw holding the steering gear to the sub-frame.
Right-hand drive:
Remove the nut (A) holding the lower half of the collision protection.
Lowering the sub-frame at the rear edge
Place a mobile jack with a universal fixture 999 5972 FIXTURE See: Tools and Equipment/999 5972 Fixture at the rear of the subframe.
Remove the screws holding the sub-frame brackets to the bodywork on both sides.
Remove the rear sub-frame screws together with the brackets and washers.
Unscrew the front screws in the sub-frame by 10-15 mm.