S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
bearing grease.
7. Installing the new ball joint
The guide screws 9995781-3 have a wrench grip (see arrow) which is asymmetrically positioned.
Aluminum wheel spindle: Use the screw (1) with the greater distance to the wrench grip.
Steel wheel spindle: Use the screw (2) with the shortest distance from the wrench grip.
NOTE: Steel wheel spindle only used on 1999 S80. All other vehicles concerned have aluminum wheel spindle.
8. Installing the new ball joint, continued
Loosely install the new ball joint using the guide screws.
Important! Leave the protective cap for the ball joint in position to prevent damaging the rubber boot.
