S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
Fold down the lateral link carefully
-
Use tool 951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder with 999 7054 Adapter incl. 2x MC6C
M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12 , 999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve , 999
7036 Drift See: Tools and Equipment/999 7036 Drift and 999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting
Rod M12X400
-
Bend the brake cover outwards slightly so that there is room for the hydraulic cylinder
-
Pull the bushing out.
Note! Center 999 7040 Drift See: Tools and Equipment/999 7040 Drift carefully on the bushing to prevent damaging the spindle when pulling
out.
Installation
Installing the rear bushing
-
Use tool 951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder with 999 7054 Adapter incl. 2x MC6C
M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12 , 999 7036 Drift See: Tools and Equipment/999 7036 Drift , 999
7035 Sleeve See: Tools and Equipment/999 7035 Sleeve and 999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034
Connecting Rod M12X400
-
Press in the new bushing
-
Remove the tools
-
Fold back the lateral link and install the screws. Do not tighten. Remove the tensioner strap.
Finishing