S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Apply a little petroleum jelly to the sensor O-rings.
Install the solenoid.
Note! The small guide lug on the solenoid should be upwards on installation.
Twist and press in the solenoid so that it bottoms against the control system
Install:
-
the spring clamp. Check that the spring clamp is locked
-
the connector.
Installing the side cover on the transmission
See Installing the gearbox side cover See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Components/Installing the Gearbox Side Cover
