S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Finger-tighten the screws. The two upper screw heads are sized M10. The other screw heads are M8.
First tighten the screws crosswise to light contact.
Then tightenM10. Tighten to 16 Nm. Tighten M8. Tighten to 12 Nm.
Install:
-
the connector
-
the cable harness and the temperature sensor in their respective clips.
Installing the side cover on the transmission
See Installing the gearbox side cover See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Installing the Gearbox
Side Cover.
