S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Tighten to 25 Nm.
Install:
-
the mechanical cable to the gear selector. Secure the cable with the catch
-
the cable to the end of the gear selector assembly
-
the key lock cable to the gear selector assembly.
Place the cable in the extracted locking sleeve the cable will be adjusted).
Initial setting of the key lock cable (adjusting)
See Gear selector lever assembly Geartronic, replacing, 4T65EV-GT, L.H.D See: Gear Selector Lever Assembly Geartronic, Replacing
Install the top panel and boot