S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
the spring clamp. Pull it straight out. Use a small screwdriver
-
the solenoid. Use a screwdriver between the solenoid and the housing. Check that the O-rings remain on the solenoid.
Installing the lock-up solenoid
Apply a little petroleum jelly to the O-rings.
Install:
-
the solenoid. Turn and press in the solenoid a little so that it bottoms against the control system
-
the spring clamp. Check that the spring clamp is locked.
Installing the oil pump