S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Quarter Window Glass: Service and Repair
Removal of Rear Side Window
Removal of rear side window
Special tools:
951 2786 Handle See: Tools and Equipment/951 2786 Handle
Special tools:
951 2787 Knife blade 26 See: Tools and Equipment/951 2787 Knife Blade 26
Removal of rear side window
Remove the C/D pillar panel as described in Panel, C-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Panel, C-Post, Replacing.
Cut out the window.
Note! Use soapy water. This helps cutting.
(1) = PUR bead.
(2) = Window knife
(3) = Guide pins.
Cut along the marked edge.
Use short blade.
Take care around the guide pins. Be careful not to damage the paint!
If the window is to be re-used: Remove the PUR bead with a chisel.
For handling PUR on the body flange, see PUR on body flange .