S90 L6-2.9L VIN 96 B6304S (1998)
Crankshaft Main Bearing Seal: Service and Repair
SPECIAL TOOLS
-
Handle tool No. 999 1801, or equivalent
-
Lifting Beam tool No. 999 5006, or equivalent
-
Support Rails tool No. 999 5033, or equivalent
-
Gear Sector tool No. 999 5112, or equivalent
-
Lifting Hook tool No. 999 5115, or equivalent
-
15 mm Socket tool No. 999 5244, or equivalent
-
Lifting tool No. 999 5428, or equivalent
-
Lifting Lug tool No. 999 5429, or equivalent
-
Assembly tool No. 999 5430, or equivalent
-
Fixture tool No. 999 5972, or equivalent
PROCEDURE
1. Support engine at rear mounting
-
Move gear selector lever to position N.
-
Disconnect battery ground lead.
-
Use support rails tool No. 999 5033, lifting beam tool No. 999 5006, lifting hook tool No. 999 5115, lifting lug tool No. 999 5429 and lifting
yoke tool No. 999 5186, or equivalents.
-
Support engine.
2. Remove air preheater pipe under engine
NOTE: Take care to avoid damage to O-ring.
3. Disconnect front section of exhaust pipe
-
Remove nuts (four).