S90 L6-2.9L VIN 96 B6304S (1998)
Blower Motor: Service and Repair
Blower Motor Replacement
NOTE:
-
The work is carried out inside the car.
-
A new type of blower motor has been developed. As a result, the blower motor cover must be modified when replacing the unit.
See: Blower Motor Cover Modification
Removal
1. Disconnect battery ground lead.
2. Remove, on right-hand side:
-
soundproofing panel under glove box
-
glove box.
3. Disconnect positive terminal strip and bracket on blower housing.
4. Remove:
-
connector
-
blower motor.
Installation
1. Install:
-
rubber gasket around blower housing
-
blower motor in housing.
2. Reconnect:
-
blower motor connector